产品描述
1.产品名称:管式曝气器
2.料管曝气器由衬管、隔膜、夹具等组成。曝气隔膜由硅橡胶或EPDM制成，衬管由UPVC和ABS制成，夹具由304不锈钢制成。
3.规格 φ 63。
3.规格 φ 63。
4.产品介绍管式曝气机是一种固定在水池底部的曝气设备。它结构简单，氧利用率高，性能可靠，不易堵塞气孔，污水无倒流，周向力均匀，寿命长，安装维护方便。该系统具有价格低廉的优点。曝气时，压力空气从空气分配支管通过供气管进入风道，曝气膜管与支撑体之间形成环形气室，使曝气膜管鼓起，空气通过膜管。微孔向水体充气。停止供气，膜管弹性收缩并紧握在支撑体上，微孔也随着回弹收缩关闭孔隙，防止水体回流到气罐中。
5.产品优势和特点
复合膜片寿命长，可达5-8年，彻底解决了橡胶膜片易撕裂、寿命短的缺点;
防撞能力强，不易损坏;
气孔不易堵塞，污水不倒流;
全部使用防腐材料。
Product Description
1. Product Name Tubular Aerator
2. The material tube aerator consists of lining tube, diaphragm, clamp, etc. The aeration diaphragm is made of silicone rubber or EPDM, the lining tube is made of UPVC and ABS, and the clamp is made of 304 stainless steel. 3. Specifications φ 63.
4. Product introduction The tubular aerator is an aeration equipment fixed at the bottom of the pool. It has simple structure, high oxygen utilization rate, reliable performance, not easy to block air holes, no backflow of sewage, uniform circumferential force, and long life., Easy to install and maintain. The system has the advantages of low price. During aeration, the pressure air enters the air duct from the air distribution branch pipe through the air supply pipe, and an annular air chamber is formed between the aeration membrane pipe and the support body, so that the aeration membrane pipe is bulged, and the air passes through the membrane pipe. The micropores are aerated to the water body. Stop the gas supply, the membrane tube elastically shrinks and holds tightly on the support body, and the micropores also close the pores with the rebound contraction, preventing the water body from flowing back into the air tank.
5. Product advantages and characteristics
The composite diaphragm has a long life, which can reach 5-8 years, which completely solves the shortcomings of rubber diaphragm that is easy to tear and short life;
Strong anti-collision ability, not easy to damage;
Air holes are not easy to block, sewage does not flow back;
All use anti-corrosion materials.
免责声明:部分内容来源于网络,如有侵权,请告知删除
苏公网安备 32028202001079号